Hydraulic Baling Press Machine for Paper Scrap and Pet Bottle

• Customization: Available
• Strapping Material: Iron Wire
• Packaging: Waste Paper,Pet Bottle,Plastic Bottle
• Model NO.: VM-2
• Automatic Grade: Manual
• Strapping Mode: Welding Type
• Driven Type: Hydraulic
• Structure: Pressure Strapping
• Reeling & Wire Feeding: Manually
• Main Cylinder: Made by Our Factory
• Clamping Cylinder: No
• PLC: No
• Conveyor: No
• Brand Name: Hellobaler
• Transport Package: Nude Package and Wooden Cases
• Specification: CE, ISO9001: 2008
• Trademark: Hellobaler
• Origin: Shandong, China
• HS Code: 8422400000
• Production Capacity: 1200set/Year

Product Description

                         Hydraulic Baling Press Machine for Paper Scrap and Pet Bottle

HelloBaler Vertical Waste Paper Baler VM Series

Model/Data		VM-1	VM-2	VM-3
Bale size (L×W×H)	mm	800×400×600 Length is adjustable	1300×800×800 Length is adjustable	1300×800×800 Length is adjustable
Cylinder		Φ125	Φ160	Φ160×2
Pressing Force	KN	100	300	600
Density	kg/m 3	400	400	450
Bale Weight	kg/bale	80-100	300±50	400±50
Capacity	t/h	0.2-0.4	0.6-0.7	0.8-1
Wire	line	3	5	5
Power	KW	7.5	11	15
Machine Weight	T	0.7	1.7	2.1
Materials	Waste textile, Paper, Cardboard, Plastic, etc.

Matters need attention
1) Without the pressure test conditions, it is not allowed to take down the lead sealing of valve and adjust the pressure.
2) The big solid things are prohibited to put into the box, otherwise the machine parts can be damaged easily.
3) When piston rod is running, strictly prohibited to stretch hand and put material again.


Troubleshooting

Faults	Reasons	Solutions
I.Motor runs normally,system is powerless	1. The rotary direction of motor is not right. 2. Sealing part of oil seal is broken. 3. Hydraulic oil of oil tank is not enough. 4. Pressure of gear pump is not enough.	1. Regulate the line to modify the rotary direction. 2. Change sealing part. 3. Inject enough hydraulic oil (2/3~3/4 of whole volume of tank). 4. Change parts of oil pipe or change gear.
II. System lose pressure suddenly, piston rod is not in top or in below position	1. Distributor valve jammed or damping hole blockage. 2. Oil is polluted seriously. 3. Gear pump is broken.	1. Repairing the reversing valve, remove the bolt of each part in order; remove all parts and clean; clear the blocked impurity and clean it with oil; then install it as per original order; requiring all parts and mating surfaces should not be crashed and scratched, and to make sure it is sealed and tight. 2. Filter or change hydraulic oil. 3. Repair or change gear pump.
III. Piston rod move and wriggle	1. Hydraulic oil is not enough. 2. Reversing valve is blocked. 3. Oil is polluted seriously. 4. Sealing parts are broken.	1. Check the oil line. 2. Clean reversing valve. 3. Filter or change hydraulic oil. 4. Change sealing parts regularly.

Factory Introduction:
1. The leader of baler production, 30 years rich experience, more than 70% customers' choice;
2.3 workshops covers more than 200, 000 square meter;
3.60 sets of various types of testing instruments;
4. More than 300 employees, including over 40 senior engineers, 100 technicians;
5. The biggest baler equipment manufacture in China;
6. The first straw baler was produced here;
7. The protoplasmic of baling equipment standards;
8. ISO9001, TS16949, SGS certificate